120A Air Plasma Cutting Machine
This machine can be used in manual cutting & when connected to CNC, it immediately turns into an automatic plasma cutting system with stable cutting quality and easy operation.
Feature |
-
Higher Cutting Speed: 9mm Mild Steel quality cut achieves 2000mm/min at 100A cutting current.
-
High Duty Cycle: 100% duty cycle (@40 ℃ up to 1 Hour). PLA-CUT 100P comes with CNC
interface which is able to cooperate with CNC system or other automatic equipment. -
Better Consumable Life: while cutting thick plate, the inner tip is completely protected and its
usage is also greatly increased. -
Compact designed. Easy to setup and operate.
-
Safer Operation: there is no potential to assistant tips during cutting process, also there is no dangerous gas involved.
-
The machine is operated with 40% of power saving and less noise compare to conventional machine.
-
The output current is set and displayed in numeral format.
-
Two cutting mode for selections,
• Single tip: better cutting capacity, and more economical cutting cost.
• Double tips: higher cutting speed, easier opeartion, and better cutting edge. -
The machine is protected from troubles due to gas pressure, temperature of machine, input voltage, over current, and ignition failure.
-
Designed with the gouging function.
Production |
These are our main advanced production process to make the high quanlity products for you.
Our products are all made in Taiwan from the beginning to the very end.
Quality Control |
All the products have been tested and/or quality checked before the delivery.
We are 100% confident about our product when it is delivered to the customer.
 |
|
|
Standard Accessory |
Description |
Qty |
|
Manual Cutting |
1set |
|
Metal Cable with Clamp |
3M |
|
Air Regulator |
1pc |
|
Electrode |
5pcs |
|
Tip |
5pcs |
|
Shielding Cap |
1pc |
|
Assistance Tip |
2pcs |
|
Connection |
Related Products
